RAIL 2000 RAIL SYSTEM

A single extruded aluminium section designed to fit directly to the wall, without the requirement for additional mounting brackets and fixing kits. Most types of Rail Clamp can be used and the rail is suitable for both General and Heavy Duty Purposes. The Rail is supplied cut into lengths of up to 3 Metres, inclusive of all trim, infill and caps and Wall Fixings (there are no extras).

Extruded Anodised Aluminium

The Rail 2000 system is an extruded anodised aluminium section which is secured direct to the wall in a horizontal plane

Silicon Rubber Featheredge Strip

To avoid dirt and contamination traps, a silicon rubber featheredge strip is supplied to be fitted to the top and bottom of the tail at the interface with the wall.

Wall Fixings Covered

A plastic insert is fitted into the middle of the rail to cover the wall fixings

Standard or Heavy Duty Applications

The Rail is suitable for Standard or Heavy Duty applications dependant on Wall Fixings

Lengths up to 3 Metres

The Rail is available in lengths of up to a maximum of 3 Meters, and is supplied with plastic end caps. Should lengths in excess of 3 Metres be required, joining Kits are available.

User Instructions

Download

Spec Sheets

Download

Catalogue

Download

Rail 2000 System

2120/0.5 

0.5 METRE RAIL PACK 

n/a 

Rail 2000 Medical Rail 

2120/0.8 

0.8 METRE RAIL PACK 

n/a 

Rail 2000 Medical Rail 

2120/1 

1 METRE RAIL PACK 

n/a 

Rail 2000 Medical Rail 

2120/2 

2 METRE RAIL PACK 

n/a 

Rail 2000 Medical Rail